. Forside (5) .

Filtrer efter

Mærker

  • 19,00 kr. - 2.809,00 kr.

Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort Betal med kreditkort

Forside

Forside

Aktive filtre

  • Mærker: Gravity
Gravity Traveler 3D Arm with Pop Filter
search

Gravity Traveler 3D Arm...

MA 3D A POP 1The Traveler Series' Pop Filter with 3D Arm

Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed.

The Pop Filter with 3D Arm MA 3D A POP 1 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space.

With this tool you can enhance your voice- and vocal recordings by placing the high-quality pop filter, with double nylon mesh and a large screen diameter of 15.7 cm between you and your microphone. This way you avoid unwanted pop noises and clipping.

Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm lets you mount it on all popular microphone stands, and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws. Voila - you're all done! Once set, the MA 3D A POP 1 stays locked in place.

Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.
Pris 199,00 kr.

På fjernlager

Gravity Pop Filter with VARI®-ARM
search

Gravity Pop Filter with...

MA POP 1

To make sure your pop filter successfully filters undesired pop noises and clipping, you need to be able to position it perfectly in front of your mouth. This is simple with the Gravity MA POP 1 pop filter, with its large screen diameter, double nylon mesh and VARI®-ARM.

The VARI®-ARM allows you to position the pop filter precisely where it will work best, and then fix into position so that it won't shift.

All joints can be moved using only one single adjustment screw. Once the desired position has been achieved, you simply tighten the screw to fix the whole VARI®-ARM. This way, your pop filter won't slip out of position while you're sitting at your desk creating a podcast or standing in the studio booth recording vocals.

The solid clamp fits on any microphone stand, on the edge of a table or any other surface you want to attach it within the clamping range of 15 mm to 35 mm.

Pris 509,00 kr.

På fjernlager

Gravity Handheld Wireless Microphone Clip
search

Gravity Handheld Wireless...

MS CLMP 34

This microphone clip acommodates most handheld wireless microphones with shaft diameters ranging from 34 to 42 mm. Made of unbreakable high-quality elastic material, it firmly holds your mic and tilts for perfect positioning. The clip has a standard 5/8" female thread and includes a 3/8" adapter to fit all mic stands and boom arms.

Pris 49,00 kr.

På fjernlager

Gravity Microphone Clamp 25mm
search

Gravity Microphone Clamp 25mm

MS CLMP 25

The GMSCLMP 25 is compatible with most handheld dynamic microphones and acommodates shaft diameters from 24 to 35 mm. The unbreakable clip holds your mic firmly in place and swivels to aim it as needed. The Gravity microphone clip includes a 3/8" adapter.

Pris 49,00 kr.

På fjernlager

Gravity Universal Microphone Clamp for Handheld Microphones
search

Gravity Universal...

MS U CLMP

Show starts in an hour, people are waiting, you are setting the stage and you feel the pressure because you just can't find that right clamp. The search is over!

With the MS U CLMP you have a clamp that fits any microphone.

It's clamping range of 14-42 mm will hold any microphone in your collection, both round or conical. It will also make sure not to scratch your microphones due to the EVA padded grip.

With a Gravity MS U CLMP, you have an all-purpose solution for attaching any hand-held microphone.

Pris 49,00 kr.

På fjernlager

Gravity Transport Bag for Square Base Plate
search

Gravity Transport Bag for...

BG WBLS 331

The robust, padded carrier bag, made of water-repellent 1680D ballistic nylon, is specially designed for the square base plates (563 x 563 mm) of the Gravity lighting stands GLS331B and GLS431B. It has two carrying straps with a soft Velcro handle, a sturdy double zip and a see-through window for labels.

Pris 299,00 kr.

På fjernlager

Gravity Spacer 41 mm to 35 mm M20
  • På tilbud!
  • -20,00 kr.
search

Gravity Spacer 41 mm to 35...

SF 20 M 20

135 mm extension for loudspeaker stands made of robust steel tube with powder coating and M20 thread (1 x male, 1 x female), suitable for all subwoofer spacer tubes with M20 thread. Also fits threads that are countersunk up to 100 mm deep, with an inner diameter of 36 mm.

Pris 99,00 kr. Normalpris 119,00 kr.

På fjernlager

Gravity Weight Plate for Round Base Microphone Stands
search

Gravity Weight Plate for...

MS 2 WP

This 2.3 kg weight disc made of cast iron can be mounted on all Gravity microphone stands with a round base, ensuring a particularly high level of stability.

VARI-WEIGHT® _ patented stability system for secure holding and simple transportation by means of an insertable weight disc.

The round base is not included.

Pris 119,00 kr.

På fjernlager

Gravity Remote operating pole for spotlights
search

Gravity Remote operating...

LS OP 1

Anyone who works as a lighting technician in theatres, TV studios, congress centres or other production venues knows: the optimal illumination of a stage is precision work. At the same time, the tight schedules of a production rarely allow for fetching a ladder every time to manually adjust static spotlights high up in the rig - not to mention the safety risk for the people on site.

With the LS OP 1, Gravity® has a solution for these situations in its portfolio. The extendable operating pole enables the alignment of installed spotlights at great heights. The adjustment options include the pan and tilt angle, as well as focus adjustment (Pan/Tilt/Focus) via standard bells and the folding of barndoors.

The maximum length of 6.4 metres is achieved via three individually lockable extensions and can be extended to the desired length in a few simple steps. In addition, the robust but lightweight aluminium construction facilitates operation enormously.

At the upper end of the LS OP 1 is the integrated hook for hanging in the pan/tilt/focus bells. The crank at the lower end of the pole allows the hook to be easily turned into the desired position. The crank can be removed for easy and space-saving transport.

Pris 2.809,00 kr.

På fjernlager

Gravity Carry Bag for Distance Poles
search

Gravity Carry Bag for...

BG DBLS 331

The BG DBL 331 is a heavy duty carry bag with 10 mm padding that holds the two GLS331B and GLS431B lighting distance poles. The bag is made from tough 1680D nylon that is water repellent and easy to clean, a padded divider keeps the poles separate to prevent scratches. The bottom and all other points of stress are reinforced for extra strength, two carry straps with comfortable wrap-around handle and the heavy gauge single pull zipper closure of the lid provide handling convenience.

Pris 469,00 kr.

På fjernlager

Gravity Floor Stand for Spots
search

Gravity Floor Stand for...

LS FLOORX B

The LS FLOORX B is a compact stand for placing light fixtures on the stage floor. The folding design of powder coated steel with ergonomic locking screw enables space saving storage, hefty rubber feet prevent marring of the floor while providing a secure grip.

Pris 119,00 kr.

På fjernlager

Gravity Universal T-Bar for 35 mm Stands
  • På tilbud!
  • -30,00 kr.
search

Gravity Universal T-Bar for...

LS TB 01

This universal crossbar quickly converts stands with a 35 mm tube diameter into light stands. It is made with light but robust aluminium and is installed quickly and safely using the robust flange with ergonomic adjustment screw.

Pris 199,00 kr. Normalpris 229,00 kr.

På fjernlager

Gravity Lighting Stand with Square Steel Base and Excentric Mounting Option
  • På tilbud!
  • -210,00 kr.
search

Gravity Lighting Stand with...

LS 431 W

The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

Pris 1.669,00 kr. Normalpris 1.879,00 kr.

På fjernlager

Gravity Lighting Stand with T-Bar
search

Gravity Lighting Stand with...

LS TBTV 17

The GLSTBTV17 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity.

The unbreakable height adjustment collars are made of steel for additional strength to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberised T-Joint _ making the T-Bar not only easier to handle and carry but also better looking than regular stands.

Pris 689,00 kr.

På fjernlager

Gravity Clamping Pole VARI®-POLE
search

Gravity Clamping Pole...

LS VARI®-POLE 01 B

Made of lightweight, black anodized aluminium tubing with a secure locking mechanism, the Gravity VARI®-POLE extends from 210 cm to 370 cm and quickly mounts between floors and ceilings. It is held in place by pressure, and strong rubber on both sides for a variety of other applications.

Pris 819,00 kr.

På fjernlager

Gravity Twin Extension Speaker and Lighting Stand
search

Gravity Twin Extension...

SP 5522 B

The SP 5522 B is a classic tripod speaker and lighting stand made from thick walled, yet lightweight powder coated steel tubing with a load capacity of 30 kg and twin extensions for a maximum height of 3 m.

The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength featuring safety pins to securely lock the extensions in place.

The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. A set of black coding rings is included with the SP 5522 B, additional ring packs are available in a wide array of colors for instant personalization.

Pris 759,00 kr.

På fjernlager

Gravity Touring-Lighting Stand with Square Steel Base
  • På tilbud!
  • -210,00 kr.
search

Gravity Touring-Lighting...

TLS 431 B

Well equipped to handle the daily grind and time constraints of touring: That's the TLS 431 B light stand from the Gravity Touring Series. Its heavy steel base featuring three M20 female threads for off-centre installation guarantees a firm footing in all circumstances, whereas two integrated handles make it easy to transport. In comparison to the standard series, the base is slightly smaller, but it still offers the same amount of stability. The added bonus here is that it can now also be used as a divider in Transflex cases. The base-to-pole connection has been made stronger by adding a reinforcing sleeve to prevent wobbling. With the 35 mm extension tube featuring a M10 female thread, the stand can be extended in height up to 2.40 meters. Thanks to the automatic LockPin® technology, it has never been easier to adjust the height of a stand. Because the pin automatically snaps into the holes when adjusting upwards, a separate locking pin is no longer necessary.

Pris 1.939,00 kr. Normalpris 2.149,00 kr.

På fjernlager

Gravity Lighting Stand with Square Steel Base and Excentric Mounting Option
search

Gravity Lighting Stand with...

LS 431 B

The GLS 431 B lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.

Pris 1.769,00 kr.

På fjernlager

Tilbage til toppen

Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.