Professional and stable 8-way socket strip in 19" format with 1 U. Perfectly suited for installation in racks and the associated power distribution of devices. For a maximum current of 16 A in connection with an IEC cable, there is the IEC C20 connection, which is installed here. The mains cable with IEC C19 on angled Schuko connection and 2 m length is included. The power distributor has an on/off switch at the front and the sockets at the rear are rotated by 45°.
Balanced signal cable with a 6.3 millimetre TRS plug and a female XLR plug, thus suitable for transmission of sensitive microphone signals to the mixing desk or amplifier. Uses original Adam Hall plugs and high-quality cable material.
Counterpart of the K3BFV microphone cable, balanced conductor routing, this time with a 6.3 millimetre TRS plug and a male XLR plug. Uses original Adam Hall plugs and high-quality cable material.
Counterpart of the K3BFV microphone cable, balanced conductor routing, this time with a 6.3 millimetre TRS plug and a male XLR plug. Uses original Adam Hall plugs and high-quality cable material.
Counterpart of the K3BFV microphone cable, balanced conductor routing, this time with a 6.3 millimetre TRS plug and a male XLR plug. Uses original Adam Hall plugs and high-quality cable material.
Sikringsholder i absolut højeste og lækreste kvalitet til ASF sikringer FFH 14WP er accepterer kabler op til 25mm2 (4 AWG) First serien er det ultimative alternativ til standard sikrings- holderen!! De specielle ASF (mini ANL) sikringer få's i størrelserne 15 - 300 Ampere Så man ikke behøver flere forskellige typer sikringer i sin installation
Højttalerkonverter der omdanner højttalersignaler, så man kan tilslutte enhver type forstærker til den originale bilradio.
SLI4.2 er en 4-kanals konverter der konvertere højttaler signalet til et RCA signal, samt skabe et remote signal. Den bruges når din radio ikke har udgangssignal til forstærkeren og når forstærkeren ikke har indgang for højttaler signal. Derudover har SLI4.2 også indbygget et USS4 kredsløb som er et højttaler simulerings kredsløb der sikre at den originale radio ikke går i nødprogram hvis man sætter en forstærker til. SLI4.2 er en af de få fuldfrekvens konvertere der findes på markedet og med en båndbredde på 10Hz - 75kHz er man sikker på at få hele med!!
This universal bracket is suitable for all flat screen monitors with VESA standard mounting hole patterns from 75 x 75 to 400 x 400 and securely clamps to 35 mm speaker poles. The heavy duty steel construction with black powder coating finish has a maximum load capacity of 30 kg and comes complete with sets of M8 and M6 monitor mounting screws.
With its Solo-G series Gravity introduces three new stands for acoustic and classical guitars, for electric and bass guitars and a universal design that accommodates most body shapes. The A-frame stands are made of heavy-duty steel tubing with black powder coating finish, soft rubber backrest and TPU support arm padding to protect the instrument's finish and nonslip rubber feet. Providing two splay angle options, the tilt back Solo-G design folds up to compact dimensions nicely for easy portability.
*Not suitable for long-term use with guitars that have a nitro lacquer finish.
Those who do not place their studio monitors on a table surface, but use dedicated stands and mounts for monitoring in their own studio, are already doing a lot of things correct. Nevertheless, studio monitors also generate oscillations and vibrations here, which are transferred to the supporting surface and can thus impair the stereo image of the speakers. Usually, the larger the surface, the more energy transfer takes place. With the SA SM IF 01 absorber pucks, Gravity has a solution ready that can have a big impact with small means.
The Gravity Absorber pucks can be placed freely under a loudspeaker (e.g. studio monitor) and achieve a decoupling of the loudspeaker cabinet and the installation surface due to their silica gel surface. This significantly reduces vibrations and oscillations and makes the stereo image more precise by reducing acoustic smearing and discolouration.
The load capacity is 36 kg when using four Gravity SASMIF01 absorber pucks, which means that most speakers on the market can be used without any problems.
The SP 3332 B is a 35 mm pole to mount satellite speakers on subwoofers. The heavy duty construction of powder coated steel is height adjustable from 82 to 140 cm. The SP 3332 B features a 35 mm bottom end and steel collar with set screw and safety pin to lock the extension pole in place. It comes with a convenient rubber retainer to secure the safety pin during transport.
Featuring a revolutionary patented design, this laptop stand is extremely stable yet lightweight and easily portable. It accomodates all sizes from 12" to 17", controllers such as Launchpad, Maschine or Push 2 and folds to compact transport dimensions in seconds. Eccentric locking clamps facilitate quick and secure tilt adjustment of both the non-slip rubberized support and base for optimum ergonomic setup. The set includes a neoprene protection bag to protect the laptop stand from dirt and scratches.
The Gravity T-Bar facilitates mounting two loudspeakers on a single stand. It is made of heavy-duty steel with a black powder-coating finish and securely attaches to all 35 mm poles. Width is fully adjustable from 31 to 49 cm.
To make sure that you can mount your speakers on your subwoofers in a time-saving and optimal way during tough touring conditions, Gravity offers the TSP 2332 B speaker pole.
The solid construction made of black powder-coated steel is height adjustable from 82 to 140 cm using the automatic LockPin® mechanism specially designed for the Touring series. This makes setup much faster, because the height adjustment lock snaps automatically into place when pulled up. No additional pin is required. The Gravity TSP 2332 B has an M20 thread at the bottom end of the pole, so you can simply screw it onto your subwoofer.
For more standing comfort when you play your instrument or sing for a longer period of time, you have already chosen the Gravity FM Seat 1.
And for even more relief on your back, there's the dedicated FM BR 1 backrest.
It is covered with pleasant leatherette and is comfortable for your spine. You can continuously adjust the height and distance to the seat using the adjustment screws, allowing you to find your perfect sitting posture.
This convenient tray mounts to any 35 mm diameter pole and converts standard speaker stands into a multimedia projector stand. Providing a flat surface of 42 x 38 cm, it also accomodates laptops, blue-ray players, monitor speakers and other equipment up to 30 kg weight. The strong all-steel construction features a 10 mm lip around the edges to add rigidity and prevent items from falling off.
Every musical era has a characteristic stage look - from the amplifier walls of the 70s to the modern high-gloss LED stage. One element, however, never changes: the microphone stand. This must offer three benefits: a stable stand, quick and easy adjustability and a compact transport size. The new Gravity® MS 43 DT B scores in all disciplines.
Folded up, the MS 43 DT B measures only 62 cm; fully extended, the tripod stand reaches a maximum height of 161 cm. The reason for this flexibility lies in the integrated double extension, which enables both a compact transport height and the maximum set-up height and also ensures high stability of the entire construction.
Additional stability is provided by the powder-coated steel tubes and the sturdy stand, which, unlike most compact microphone stands, is not made of plastic but of robust zinc die-cast.
The ergonomic height adjustment and alignment of the MS 43 DT B is carried out via the Gravity® adjusting screw, which have proven themselves on live stages and in the studio alike, and are made of highly resistant ABS with a non-slip soft-touch coating.
A music stand is quick to assemble: Fold out the legs, set it up, adjust the height, then adjust the sheet music rest - that's it! If it were just that simple... Sometimes it rattles here, then the clamping screw doesn't tighten properly and the music stand slowly but surely dips backwards. And when a whole choir or a group of music school students needs to be equipped, the details of a stand construction decide whether the performance or rehearsal goes well from the start or not...
With the NS 441 W folding music stand, Gravity® has thought of all these potential pitfalls. The robust tripod construction made of solid steel stands firmly on the floor and can be locked in position quickly and easily. The highlight, however, is further up: Here you will find two clamping brackets that have been specially developed for the NS 441 W. Instead of tediously adjusting the height of the music rest with clamping screws - and then noticing that the screw connection has been overtightened and no longer grips properly - you simply lift one or both clamps, pull out the stand and push the clamps back down. Now unfold the music stand, tilt it, tighten it and you're done!
The music stand can also be folded to a particularly compact size and safely stored in the neoprene carrying bag that comes with it. This offers two advantages: firstly, it allows you to carry several stands without them getting caught in each other or slipping out of your hands. Secondly, the neoprene material is also resistant to a little rain, so that you can save yourself the tedious task of wiping the stand dry at open-air performances.
Whether at home practising, in the rehearsal room with the band, at music school or as a choir director - with the NS 441 W, Gravity® offers you a flexible and stable companion that can be set up quickly and easily.
Professional productions need a big studio - this guiding principle was considered irrefutable for decades. Today, entire albums are produced in small home studios. Getting the most out of a cramped environment requires compact and well thought-out solutions, like the Gravity® SP 3102 CB studio monitor table stand.
With the SP 3102 CB, you can place your studio monitors directly on your desk without worrying about stability or taking up too much space. Thanks to the continuously height adjustment, the monitoring speakers can be precisely aligned with your sitting position - and the stereo triangle is ready!
The SP 3102 CB is based on a robust steel construction that ensures a secure stand for your studio monitors. The rubberised non-slip feet on the bottom of the table base and the EVA-padded bearing surface for the speaker also contribute to this.
The Gravity® SP 3102 CB is the ideal solution for small tables and storage areas in home studios and is aimed at users who do not want to give up on a stable stand and precise alignment of the monitors even in cramped environments.
LED STICK 1 BWith the LED STICK 1 B, Gravity® sheds light into the dark.
This compact light bar helps you to generate light wherever you need thanks to the integrated rechargeable battery.
You can choose from two different whites (cool and warm white), switch and continuously dim them as desired.
Another absolute highlight are the magnets. The led light bar is equipped with four strong magnets at the bottom, which allow you to attach the lamp to any metal object (e.g. racks, music stands, cases, etc.). This way you don't need to screw the lamp.
And there is more to it than that. Thanks to the two 3/8" threads, the LED STICK 1 B can be mounted both horizontally and vertically to any microphone stand.
For even more flexibility in positioning the light, you can rotate the light bar so that the illumination is always directed to where you need it. For safe transport, the light bar has a wrist strap that allows you to hold the LED STICK 1 B securely.
This ultra slim and elegant T-shape desk lamp with silicone coated gooseneck provides uniform illumination exactly where you need it. It features a strip of 18 LEDs that are switchable between warm or cool white (approx. 3,000/6,000 K), and the touch sensitive power button doubles as a stepless dimmer switch. The gooseneck section is easily flexible yet stays put where you bend it. The Gravity T-shape desk lamp integrates a convenience USB type A port for charging smart phones and tablets and comes with a 12V power adapter. It also makes a great piano lamp, workbench light or bedside reading lamp.
If you need to mount your spotlights or loudspeakers higher than with our popular LS 431 B, you are perfectly equipped with the sturdy LS P 431 XL B distance pole.
The great advantage: thanks to the double extension, you can raise your lights and PA speakers up to 3.5 metres. A sleeve has been added to the bottom end of the pole to ensure additional stability.
The distance pole is made of powder coated steel and the upper extension tube has a diameter of 35mm including a internal M10 thread.
The Gravity® LS P 431 XL B distance pole is another practical addition to your touring routine and is compatible with all our round and square steel stands.
This all-steel tripod music stand and tilting desk fold down to a compact size for easy portability Providing improved stability, the legs are made of heavy duty tubing while redesigned clamping collars permit ultra quick and easy height adjustment without set screws from 67 to 138 cm lip to floor. To facilitate handling, the folding instructions are printed on the rear of the desk. The music stand comes with a convenient carry bag made of neoprene.
Designed for all acoustic, electric and bass guitars, Gravity guitar racks are available in four versions accommodating 3, 5, 7 or 9 instruments. They are made of heavy-duty steel tubing with a black powder coating finish. Holding the necks firmly and securely the adjustable soft touch yokes are padded and detachable. The rails supporting the guitar bodies are covered in specifically formulated foam to prevent dents and scratches. Quick to set up and space saving, the Gravity guitar racks fold up flat for easy transport and storage.
*Not suitable for long-term use with guitars that have a nitro lacquer finish.
It is especially important on the road that all instruments, devices and accessories are compact, safely packed and easy to stow in the bus.
The Gravity® Rapid Desk Set 1 combines the proven and stable KSX 2 RD with the precisely fitting cover BG RD C and the transport bag BG X2 RDB.
This creates a stable desk in just a few steps, which looks aesthetically pleasing when used with the cover and is easy and safe to transport with the transport bag.
This combination provides an absolutely solid solution for events such as weddings or galas.
As a musician or DJ, it is important that all your instruments, equipment and accessories are compact, safely packed and easy to carry in the van when travelling. The Gravity® Rapid Desk Set 2 combines the proven and stable KSX 2 RD with the equally proven LTS 01 B foldable laptop stand and BG X2 RDB transport bag. In just a few simple steps, you can create a sturdy and practical desk that allows you to position your equipment perfectly with the laptop stand and is easy and safe to transport with the carry bag.
Needless to say, this combination is an absolutely solid solution for stages and events such as weddings or galas.
The KSX 2 is a stable, solid keyboard stand with a double X support and a 65 kg load capacity. The height can be comfortably adjusted up to 90 cm with the quick lock. The black powder-coated steel design boasts reinforced junctures for maximum durability and long-lasting, non-slip end caps.
This keyboard stand with table-like construction offers superior stability making it particularly suitable for heavy keyboards. It is height-adjustable in small incremental steps, making the stand suitable for both seated and standing applications.
The legs can be fitted in two basic configurations _ either perpendicular to the vertical structure or angled outwards _ the latter configuration offers additional stability and more leg room. The top rests can be adjusted to the width of the keyboard and can also be angled in small incremental steps over a range of 360 degrees. All in all, this solid steel construction comprises all features possible in such a design without compromise.
For transport, both the legs and the top rest can be folded inwards, resulting in a very compact transport height. The stand includes one VARI-FOOT® leveling foot to compensate for ground irregularities.
The LS 331 B lighting stand features a large heavy steel base providing a firm footing and a single extension for a maximum height of 2.4 m. The 35 mm pole includes a male threaded M20 insert, the base tube has a female M20 end. Two integrated base handles facilitate transport.
The GLS 431 W lighting stand features a large heavy steel base providing a firm footing and three M20 female threads that allow to mount extra weights off-centre. The 35 mm extension with female threaded M10 insert permits a maximum height of 2.4 m. Two integrated base handles facilitate transport.
The GLSTBTV28 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity. The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberized T-Joint _ making the T-Bar not only easier to handle and carry but also look better than regular stands.
The MA TRAY 1 is a 360° adjustable steel tray that easily attaches to any microphone stand. The 250 x 195 mm size is large enough to accommodate tablet computers and holds accessories such as capos, picks or small percussion instruments.
Enabling ultra flexible microphone orientation, this premium quality stand features a 36.5 cm gooseneck on a thick walled 114.5 cm tube and a heavy duty round base made of cast iron.
The gooseneck integrates a 3-pin female XLR connector for directly attaching a microphone while the tube sports a lateral XLR mic cable connector at the bottom end. This permits quick, clean setup without mic clips and running the cable up the stand.
To extend the stand's height and increase stability, additional XLR goosenecks and a weight disc are available as accessories.
Vi bruger cookies til at forbedre vores tjenester, give personlige tilbud og forbedre din oplevelse. Hvis du ikke accepterer valgfrie cookies nedenfor, kan din oplevelse blive påvirket. Hvis du vil vide mere, så læs venligst cookiepolitikken.
